Product Overview:
- Water & weather resistant
- Suitable for Middle east conditions
- Enhanced bond and tensile strengths
- More open time & High slip resistance
- Safe and easy to use
Manfacturer Overview:
SAAK Factory for Construction Chemicals was established in 2014 to perform two main objectives:
1- To be one of the leading construction chemical manufacturers in the Gulf Cooperation Council (GCC) Countries.
2- To offer intelligent solutions based on innovative products and tailor made services to our clients.
SAAK Factory for Construction Chemicals is a new generation company flouted by technical experts who
have worked in multinationals of this field to provide the best solutions for the construction industry.
An unmatched research infrastructure with staff and technical experts who have worked in various
multinational companies with the ability to generate quality product, ensure to serve its clients ultimately
and profoundly significant. Our experts at SAAK offer comprehensive solutions that open up infinite
possibilities to offer world class products with expertise for its customer’s satisfaction.
Product Usage:
- For ceramic tiles.
- Tiling on wall surfaces plastered with Saveto products.
- Ceramic Tile Fix is ideal for fixing Ceramic Tiles, Terrazzo Tiles, floor Marbles, and stones.
- Tiling on smooth concrete surfaces, lightweight bricks, blocks, plasterboards.
- For internal applications and suitable for horizontal & vertical surfaces.
Tips:
- Use the mixed material within 2 hours.
- The substrate should be sound and clean.
- Remove the hardened material using mechanical means.
- Clean tools and equipment with water immediately after use.
- Allow the installed tiles to remain undisturbed for at least 48 hours.
- Do not add water to the mixture once the mortar adhesive starts to harden.
- Mortar adhesive must not rise between the tile joints higher than halfway the thickness of the tiles.
- Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.
- For mixing use a low- speed electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency.
- Wet all surfaces (except gypsum board) with clean water before Ceramic Tile Fix application. The surface should appear damp with no water pooling.