Product Overview:
- Suitable for dry & wet conditions.
- Excellent Slip resistance and Water-resistant.
- Factory controlled pre-blend ensures consistently high quality.
- It is a cementitious mortar adhesive composed of hydraulic binders, selected aggregates, and special additives.
- An original sealed bag of Ceramic Tile Fix has a shelf life of 12 months, provided it is stored clear of ground in a dry, shaded place below 35ºC.
Manfacturer Overview:
In 1981, Saudi VETONIT Co. Ltd. (SAVETO) was established as a Saudi European JV, in partnership with the leading manufacturers of building finishing materials and specialty chemicals in northern Europe. In 1991, Rashed Al Rashed Group assumed full ownership of SAVETO, becoming the first Saudi Company to offer a full range of advanced construction chemicals and building materials to the Middle East and North Africa markets (MENA region) under SAVETO & VETONIT brands.
Product Usage:
- For ceramic tiles.
- Tiling on wall surfaces plastered with Saveto products.
- Ceramic Tile Fix is ideal for fixing Ceramic Tiles, Terrazzo Tiles, floor Marbles, and stones.
- Tiling on smooth concrete surfaces, lightweight bricks, blocks, plasterboards.
- For internal applications and suitable for horizontal & vertical surfaces.
Tips:
- Use the mixed material within 2 hours.
- The substrate should be sound and clean.
- Remove the hardened material using mechanical means.
- Clean tools and equipment with water immediately after use.
- Allow the installed tiles to remain undisturbed for at least 48 hours.
- Do not add water to the mixture once the mortar adhesive starts to harden.
- Mortar adhesive must not rise between the tile joints higher than halfway the thickness of the tiles.
- Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.
- For mixing use a low- speed electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency.
- Wet all surfaces (except gypsum board) with clean water before Ceramic Tile Fix application. The surface should appear damp with no water pooling.